
Paver sealing for Lake Mary homes
Paver Sealing in Lake Mary, FL
Lake Mary pavers can be sealed before holiday guests arrive, so call (689) 356-6421 for a free estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Lake Mary
Paver sealing is available across Lake Mary, from the streets near downtown to the neighborhoods along Lake Mary Boulevard. Driveways, pool decks and walkways all qualify, and a contractor handles the wash, the sand and the sealer. The estimate is free. Call (689) 356-6421 and expect an answer within 1 business day, often much sooner.
Think of the weekend you host family: a front walk with dark streaks, a pool deck that looks dull, joints full of weeds. After the wash, new sand and a fresh coat, the whole yard reads as one clean color. Send the contractor a short note when you request your free estimate, and you will get a plain answer on what your pavers need.

Why hire a local paver sealing contractor in Lake Mary?
About 63 percent of occupied Lake Mary homes are owner-occupied, so the pavers are yours to look after. A local contractor can give you a clear schedule and price, and you can request your free estimate to start.
A free estimate
The contractor looks at your Lake Mary pavers at no charge. You get a price before any work is agreed.
A range to check against
Central Florida companies publish $1.50 to $3.00 per square foot to clean, sand and seal. Hold your quote up to that range.
A plan for pool and sprinklers
Pool service and irrigation both get paused around sealing day, so the contractor lays out the timing with you in advance.
Your call, every time
You choose the date and the finish. A Lake Mary estimate has no obligation attached, and a no is fine.
Get Your Free Estimate in Lake Mary
Tell us about your pavers in Lake Mary.
Free, no obligation

What paver problems show up most in Lake Mary?
A job that has to fit a work week
Lake Mary has a SunRail station and a business base that includes AAA and Deloitte, so plenty of weekdays are spoken for. A sealing job takes one to two days, with washing and sand work first and sealer second. That means you need a window when nobody needs the driveway. Ask for the two days in writing so you can plan rides and parking. Weekday sealing also avoids weekend traffic on the street, which keeps crews and cars from crowding each other.
Pool service and sprinklers in the way
One paver company asks owners to pause pool service on sealing day and the day after, and to keep irrigation off during the job and for 24 hours after. Lake Mary sprinklers also run only on set days, with no watering from 10 in the morning to 4 in the afternoon Wet pavers cannot take sealer. So the contractor needs your timer schedule before picking a day. A short call with your pool company and a look at the sprinkler controller will settle it in a few minutes.
Rust marks from sprinkler water
UF/IFAS notes that most Florida well water carries iron and often leaves orange stains. Seminole County says reclaimed water has no staining minerals, so the marks depend on which water your sprinklers use. If you see orange fans on the walkway, tell the contractor. Rust has to be treated before sealing, because sealer would lock it in. A quick test helps: if the stain sits where the spray lands, the sprinkler water is the likely cause.
Pool decks and natural stone
A Central Florida company says chlorinated water, constant moisture and sun are hard on pool deck pavers. An Orlando company adds that travertine needs a different sealer than brick. A product made for brick is the wrong choice on stone. Many Lake Mary lanai floors mix both, so each surface may need its own plan. Cleaners that are safe on brick can dull natural stone, so rinse and wash choices change from one surface to the next. Ask the contractor to name the product planned for each surface.
Afternoon storms that move the date
Paver companies in this area say they schedule around afternoon storms, and sealer needs a dry surface. A shaded patio can stay damp after a sunny drive has dried. If rain is in the forecast, a careful contractor waits. Plan for one move of the date, and treat it as a good sign. Late fall and winter bring less rain than summer, which gives you more room to pick a date. Pavers sealed in damp weather can look cloudy, and that is hard to undo.
Do Lake Mary neighborhoods near downtown seal differently than those near I-4?
Not in the steps, but in the details of each lot. Downtown Lake Mary sits near the SunRail station, about half a mile from Lake Mary Boulevard and Country Club Road, while Interstate 4 runs along the western edge of the city. Mention which part of Lake Mary you live in when you request your free estimate.
Newer streets and older ones tend to differ in sand and shade. The 2020 census counted 7,132 housing units in Lake Mary, built across many years. Mature oaks over an older walkway keep it damp, while a newer drive in full sun fades faster. Call (689) 356-6421 and describe the trees over your pavers.
Some communities have their own rules. Heathrow Woods and Alaqua Lakes sit in the county's reclaimed water program, which sets watering days and bars washing driveways with that water. Homeowners associations may also have rules on sealer color. Check yours, then request your free estimate so the estimate fits what is allowed.
What does paver sealing cost in Lake Mary?
Across Central Florida, published rates run $1.50 to $3.00 per square foot for the clean, sand and seal. A Lake Mary job moves inside that range with area, weeds, lost joint sand and any old sealer to strip. A pool deck with a lanai floor adds square feet quickly. For a number on the pavers at your home, request your free estimate, and the estimate carries no charge.
Surface type matters as well. Travertine and other natural stone need a different sealer than brick, which can change the bid. A plain, open driveway is easier than a courtyard with several steps and planters. Call (689) 356-6421, and the contractor will say which of these match your yard.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $450 to $900 |
| 600 sq ft | Two car driveway | $900 to $1,800 |
| 1,000 sq ft | Large driveway or pool deck | $1,500 to $3,000 |
| 1,500 sq ft | Driveway plus pool deck | $2,250 to $4,500 |
Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

How does a paver sealing job work in Lake Mary?
Look at the yard and agree on two days
The contractor walks your Lake Mary pavers and notes the surfaces, the shade and any old coat. Sealing usually takes one to two days, so you pick a window together. If there is a pool, the plan includes pausing pool service on sealing day and the day after. Mention any rust marks or low spots at this stage. Take a few photos of problem spots and share them before the visit, since they speed up the estimate.
Pretreat trouble spots and wash
Day one starts with pretreatment of algae, leaf stains and irrigation rust, since those do not wash out with plain water. Then the whole surface is washed. Rinse water should stay away from planting beds and from any natural stone edging. The pavers need time to dry before anything else happens. After the wash, the pavers are left to dry, and the contractor checks joints for stains that remain.
Fix the joints and the edges
Washing pulls out joint sand, so low areas get fresh sand and the edges get a check. Lost sand widens joints and lets weeds in, so this step protects the result. Sunken spots are marked for repair. Everything gets swept clean before the next day. The contractor also notes where a downspout or a sprinkler head sends water across the pavers, since those spots lose sand first. Tight joints also slow weeds, which saves you effort in the months after.
Turn off the sprinklers and wait for dry
Irrigation stays off during the job and for 24 hours after. Sealer needs a dry surface, and Lake Mary storms often arrive in the afternoon. The contractor checks the forecast and may start early. A wet corner is checked by hand before it is coated. If your sprinklers are on a timer, now is the time to confirm it has been switched off.
Seal and stay off for the stated time
The sealer is sprayed on in your chosen finish and rolled so it works into the joints. One company advises 4 to 6 hours before feet, about 24 hours for furniture and at least 48 hours for cars. Another Central Florida company says 48 to 72 hours for vehicles. Ask the contractor for the wait that fits the product. A short walk-through at the end lets you point out any spot that looks uneven before the crew leaves. Then you can enjoy the clean surface without worry.
Complete paver services in Lake Mary
A Lake Mary job moves in a set order across one to two days. The first day covers pretreatment, washing, joint sand and edge checks. The second day is for sealer, once everything is dry. To hear how that would work around your calendar, call (689) 356-6421.
Driveways take cars and the summer sun. Walkways under oaks stay damp and go green first. Pool decks and lanai floors take chlorinated water and constant moisture. Tell the contractor which of these you have when you request your free estimate, because each one wears in its own way.
Water-based sealer is the standard that one Central Florida company points to for Florida humidity, since solvent-based coats can turn white and peel. Travertine needs a different, impregnating sealer than brick. A wet look deepens color and shows scuffs sooner. Call (689) 356-6421 to talk through finish and surface.
Timing in Lake Mary depends on weather and on water. Afternoon storms can delay a day, and sprinklers need to stay off for 24 hours after the job. Pool service pauses for two days. For a date that works with all of that, request your free estimate.
Questions to ask before you hire
- What do you do about the white powder that keeps rising out of the pavers?
- Can you seal travertine and brick pavers the same way as concrete ones?
- Can I see a matte finish and a shiny finish on a small spot before you pick one?
- Does the estimate cover fresh joint sand and filling the low spots?
- How soon can I walk on the pavers, and when can the cars come back?
- What happens if the weather turns after the sealer is down?
- How do you protect my landscaping, sprinkler heads and mulch beds?
What do sealed pavers look like around Lake Mary?









Why local matters in Lake Mary
A contractor who works Lake Mary knows that sprinklers here run on set days and stay off from 10 in the morning to 4 in the afternoon. That shapes when a yard can be washed and sealed. Someone from out of town may book a day when the timer will soak the pavers. To reach a contractor who works Lake Mary, call (689) 356-6421.
Local knowledge also covers rust. Orange marks come from iron in some irrigation water, while reclaimed water carries no staining minerals. Knowing which neighborhoods use which water helps the contractor guess the cause. You can request your free estimate and ask how the contractor tells the difference.
Holiday timing is another local detail. The city lists Holiday in the Park on December 4 and a movie night on December 18, and many households host guests that month. A contractor who is booked early in the season may have limited dates. If you want clean pavers before guests arrive, request your free estimate soon.
How did Lake Mary grow from railroad stops to office parks?
It began with two railroad settlements, Bent's Station and Belle Fontaine, along the South Florida Railroad. The city is named for Mary Sundell, Frank Evans settled the area in 1882, and the first post office opened in February 1887. The Lake Mary Historical Museum keeps records from those early years. If your older home sits near downtown, request your free estimate.
Today the city has 16,798 residents and a strong business base, with AAA, Deloitte and Verizon among the companies operating nearby. Lake Mary Elementary, Crystal Lake Elementary and Lake Mary High serve its families, and the Cross Seminole Trail runs from the SunRail station. Near any of these Lake Mary landmarks, call (689) 356-6421 and name your street.
Frequently Asked Questions
What is the average cost to seal pavers in Lake Mary?
Published Central Florida rates are $1.50 to $3.00 per square foot to clean, sand and seal. A Lake Mary job moves inside that range with area, weeds, lost sand and old sealer. Ask for the total square footage in the quote so you can compare it fairly. Pool decks count toward the total. Smaller jobs sometimes carry a higher rate per square foot, so ask how the contractor treats a small walkway.
How long does paver sealing last in Lake Mary?
One Orlando company says a coat lasts two to four years, with a maintenance cleaning every 12 to 15 months. A shaded pool deck with light traffic may hold closer to four years. A sunny Lake Mary driveway with daily cars may need attention sooner. Rust, algae and traffic all shorten the time between coats.
How often do you need to reseal pavers in Lake Mary?
Quotes usually land between two and five years from one coat to the next. Shade, traffic and sun change the answer for each yard. One Jacksonville company offers a simple test: water that beads means the sealer still works, and water that soaks in and darkens the pavers means it is done. Rinsing the pavers with plain water between coats keeps dirt from building up. A fresh sweep every few weeks helps too.
Is it better to spray or roll paver sealer in Lake Mary?
Professionals usually spray and then roll. One company says spraying gives even coverage and rolling works the sealer into the joints so it does not puddle. Rolling alone can leave lap marks. Ask the contractor which method will be used on your pavers. Both steps happen in one visit, so you do not need to plan around two crews. Either way, the goal is an even coat with nothing pooled in the low spots.
Do I need to turn off my sprinklers for a sealing job in Lake Mary?
Yes, keep irrigation off during the job and for 24 hours after, as one Central Florida paver company asks. Lake Mary sprinklers also follow county watering days, so tell the contractor your schedule. Wet pavers cannot take sealer, and water too soon can mark a new coat. A written schedule from the contractor helps you set the timer ahead of time.
Can my pool run on sealing day in Lake Mary?
The pool itself is fine, but one company asks owners to pause pool service on sealing day and the day after. That keeps chemicals and equipment off the work area. Ask your pool company to skip those two visits, or to come only when the contractor says it is safe. A note taped to the pool equipment helps avoid a mix-up.
Can travertine be sealed with the same product as brick pavers in Lake Mary?
No, natural stone like travertine needs an impregnating sealer that differs from what goes on brick. An Orlando company says the two products are fundamentally different. A Central Florida company also suggests non-slip additives around travertine pool areas, so ask about that. Rinse water also needs to stay clear of the stone edges, so tell the contractor where stone meets brick.
How soon can I use my driveway after sealing in Lake Mary?
One company advises about 24 hours before foot traffic and 48 to 72 hours before vehicles, and another says 4 to 6 hours for feet and at least 48 hours for cars. Humid or shaded conditions add time. Let the contractor name the wait for the product on your pavers. Keep pets off the surface during that time as well.
Ready for a Free Estimate in Lake Mary?
Call (689) 356-6421 and tell us about your pavers.
Free, no obligation
