Click To Call(689) 356-6421Click To Get A Free Estimate
Red brick paver walkway with a soldier course border running to a front porch under live oak shade

Richer brick color with joints that stay full

Brick Paver Sealing in Sanford, FL

Call (689) 356-6421 for a free estimate on sealing the brick pavers at your Sanford home.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 356-6421

Who seals brick pavers in Sanford, and how fast will they reply?

A local contractor seals brick pavers across Sanford, FL, and you can expect a reply inside 1 business day, often within a few hours. The visit and the quote are free, and booking is optional. To ask a question first, call (689) 356-6421.

Brick that has gone brown and chalky in the sun, with moss in the seams and sand gone from the joints, can look warm again after a gentle wash, fresh sand and the right coat. Brick drinks water, so the sealer is chosen for how it soaks in. Send a photo or describe the walk, patio or drive, then request your free estimate.

Call (689) 356-6421

Why choose us

Why does brick need a different sealer than concrete pavers?

Brick is more porous, so it takes in water and stains faster, and the wrong coat can trap moisture. A Florida sealing company describes a penetrating sealer for brick that soaks into the paver and the joint sand, and a water-reducible urethane that comes in gloss or natural. Castle also notes that brick, travertine and concrete differ in porosity and sealing needs. To ask which fits yours, call (689) 356-6421.

Penetrating or surface coat

A penetrating product soaks in and leaves less film on the surface, while a urethane sits on top and sets the shine. Unilock warns that trapped moisture and too much sealer can leave a whitish film. A test on a small spot comes first, so request your free estimate.

What the joints get

The Florida company says its flood coat hardens the joint sand, much as polymeric sand would. Unilock adds that sealing tightens the top of the joints and leaves fewer places for seeds to settle. For weedy seams, call (689) 356-6421.

Where does a contractor seal brick pavers around Sanford?

Brick pavers at homes in Sanford and the towns below can get a free estimate, from Casselberry and Maitland to Edgewater and New Smyrna Beach. Each town page covers local details. If your address is not listed, call (689) 356-6421.

Contractor kneeling beside a red brick paver patio while two homeowners look at the joints

What does brick have to do with Sanford?

Quite a lot. Wikipedia says the city finished multimillion-dollar streetscapes on 1st Street and Sanford Avenue with brick pavers, wider sidewalks and trees, and older streets here sit under live oaks. Many Sanford homes pair brick with oak shade, which means damp pavers and green film. To have yours checked, request your free estimate.

Live oaks and damp brick

Shade slows drying, and Castle says covered or partly shaded patios grow more mold and algae than sunny drives. Unilock says pavers in shade can need about 24 hours to dry after washing. Tell the contractor which side stays wet when you call (689) 356-6421.

A walk with years on it

Older brick may already carry a coat that has clouded or peeled. A Sanford company says peeling, cloudy or white sealer is stripped first so the new coat bonds. To find out what is on yours, request your free estimate.

Gloss or natural: how will my brick look?

A Florida sealing company says gloss reads as semi-gloss on brick and that the shine depends on the brick's porosity. Unilock says a wet look deepens color, and that high gloss can turn slippery when wet. To compare finishes on a spot, call (689) 356-6421.

Brick walks and pool edges

A matte or natural coat keeps traction on brick near a pool or a damp shady walk. A Florida company adds a non-slip additive for pool areas. Ask for it if the brick is wet often, then request your free estimate.

Color you already like

If the brick looks right today, a natural finish keeps it that way and a test spot confirms it. A wet look is for faded red and tan. Call (689) 356-6421 to see both.

Pricing

What does brick paver sealing cost in Sanford?

An Orlando company lists brick paver clean, sand and seal at $1.50 to $3.00 per square foot, the same band posted for all pavers in Central Florida. It puts natural stone at $2.00 to $3.50. For a price on your brick, request your free estimate.

Paved areaTypical exampleAt $1.50 to $3.00 a sq ft
300 sq ftBrick entry and walk$450 to $900
500 sq ftBrick patio$750 to $1,500
800 sq ftBrick drive or lanai$1,200 to $2,400
1,000 sq ftLarge brick area$1,500 to $3,000

Math uses the $1.50 to $3.00 per square foot an Orlando paver company lists for brick paver clean, sand and seal, read in November 2026. Castle lists a $1,000 project minimum, so small areas can cost more per foot. Stripping and repairs are priced apart.

Stripping and resealing brick

The Orlando company lists stripping and resealing at $3.50 to $5.00 per square foot over two to three days, and Castle says stripping adds $500 to $1,000 or more. Peeling or cloudy sealer lands in that group. To ask whether yours does, call (689) 356-6421.

Prices that should worry you

The Orlando company says a $0.40 per square foot quote is a red flag, and a $10 quote for brick sealing suggests an installer, not a sealing company. Castle says prices well below $1.50 skip prep. To get a sound bid, request your free estimate.

Related pages

Get a Free Estimate

How long does a sealer last on brick pavers in Florida?

A Florida sealing company says about five years for its urethane on brick, while the Orlando company says two to four and Unilock three to five. Sun and wet shade cut that down. To plan your schedule, call (689) 356-6421.

Checkups instead of a full redo

The Florida company offers a cleaning and inspection near one year at about 30 percent of the first price, and a sand and coat visit near year two at about 60 percent. Ask whether a local contractor offers the same, then request your free estimate.

Signs it is time

Water that soaks in, sand missing from the joints and a flat, chalky color are the usual clues. Call (689) 356-6421 if you see them.

How it works

What is the brick paver sealing process?

Brick follows the same order as other pavers, with product choice adjusted. The Florida company cleans with equipment that can reach 250 degrees, applies a weed and mold inhibitor, wet-sands the joints and lays a flood coat plus two more. For your own plan, call (689) 356-6421.

1. Look over the brick

The contractor checks the surface, the joints, old sealer and any spot where water sits.

2. Clean and treat

A mold and weed inhibitor goes on, then a gentle wash lifts the grime without blasting the joints.

3. Sand the joints

Graded joint sand is wet-set so it fills the voids around and under the brick.

4. Dry fully

Unilock says drying can take a few hours in sun and about 24 in shade.

5. Seal and review

A sealer made for brick goes on, and the contractor explains the finish and the wait times.

How long should I wait after the coat goes on?

Castle asks for 4 to 6 hours before feet and 24 hours before furniture, longer in humid or shaded spots. Unilock allows up to 48 hours to cure and asks for 24 to 48 hours of clear weather. The Orlando company says water-based product is walkable in 3 to 4 hours and cured in 24 to 48, and solvent can need up to 72. To pick a dry window, request your free estimate.

Can sealing help with white powder on brick?

Not until it clears. Unilock says efflorescence typically fades in two to three months, can take up to a year and should be gone before sealer goes on. A new brick job should wait 60 to 90 days, per Unilock. Mention the install date when you call (689) 356-6421.

Photos

What do sealed brick pavers look like around Sanford?

Wide sealed gray and brown paver driveway with a circular border at a brick and stucco home on an older Sanford brick street
Sealed brick-red paver pool deck beside a kidney-shaped pool in a screened enclosure on an older Sanford brick street
Sealed charcoal paver patio with a stone fire pit and Adirondack chairs under a large oak on an older Sanford brick street
Sealed brick-red paver front walkway with a soldier-course border up to a porch on an older Sanford brick street
Close view of older brick pavers after sealing on an older Sanford brick street
Shaded paver patio with one cleaned half beside a mossy half on an older Sanford brick street
Contractor pressure cleaning a screened pool deck on an older Sanford brick street
Contractor spraying sealer on a paver walkway on an older Sanford brick street
Questions

What do Sanford homeowners ask about brick paver sealing?

How much to clean and seal pavers?

Posted Central Florida prices run $1.50 to $3.00 per square foot for the whole job. An Orlando company lists brick pavers in that same band, with natural stone higher at $2.00 to $3.50. A 500 square foot brick patio in Sanford would then run about $750 to $1,500.

How long does paver sealing last in Florida?

An Orlando company says two to four years, and Unilock says three to five. A Florida sealing company says about five on brick, with a cleaning visit near one year and a sand and coat visit near two. Sun, rain and traffic move the number.

What are common mistakes to avoid when laying pavers?

Weak bases and poor drainage cause most trouble, and Unilock says sealing cannot cure either. Sealing too soon is another one. Unilock asks new pavers to wait 60 to 90 days, and a Florida company says a couple of weeks at least.

Is it necessary to seal pavers in Florida?

Not strictly. Unilock says its pavers perform without a coat. Brick is more porous than concrete, though, so many Sanford owners choose a sealer to slow stains, green film and sand loss.

Can brick pavers be sealed the same way as concrete pavers?

The steps are alike, but the sealer is chosen for the brick. A Florida company describes a penetrating sealer that soaks into brick and joint sand, plus a water-reducible urethane in gloss or natural. Ask which product is planned for yours.

Will sealer make my old brick pavers shiny?

Only as much as you pick. A Florida company says gloss reads as semi-gloss on brick and that shine depends on how porous the brick is. A natural finish keeps the original look, and a test spot shows the difference.

Why is there white powder on my brick pavers?

That is usually efflorescence. Unilock says it typically clears in two to three months, can take up to a year and should be gone before any sealer goes on. It is mostly a looks problem and does not mean the brick is failing.

Does Sanford have brick pavers downtown?

Yes. Wikipedia says the city finished multimillion-dollar streetscapes on 1st Street and Sanford Avenue using brick pavers. Brick pavers at a home call for the same care, from cleaning to a matched sealer.

Want brick sealing priced for your home?

Share the street and a photo of the brick, and a local contractor responds inside 1 business day, usually much faster.

Call (689) 356-6421

Free, no obligation