
Sealer that keeps color and sand where they belong
Paver Sealing in Sanford, FL
Call (689) 356-6421 for a free paver sealing estimate on your Sanford driveway, patio or pool deck.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who can seal pavers at my Sanford home?
A local contractor seals pavers throughout Sanford, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and booking is your call. To begin, call (689) 356-6421.
A coat of sealer deepens color, holds joint sand in place and makes dirt and green film easier to rinse off. Think of the driveway after a damp summer, pale in the middle and sandy at the seams, then dark, even and tight again. Cars hit the driveway while splash and bare feet hit the pool deck, so each area gets its own plan. Tell the contractor how each one gets used, then request your free estimate.
Paver Sealing Sanford Is Proud to Serve Central Florida

What is included when pavers are sealed in Sanford?
Plan on four stages: a walk-through, a wash, new joint sand and the coat itself. The wash and the drying time take up most of the day. To walk through them for your own house, call (689) 356-6421.
Walk-through
Square footage, loose pavers, old sealer, screen cages and any spot where water sits are noted before a price is set.
Wash
Algaecide treats mold, mildew and weeds first, then a low-pressure wash lifts the loosened grime without blasting out sand.
Joint sand
Sand is swept into every seam and wetted down to pack it, which steadies the pavers and slows weeds.
Sealer coat
The product goes onto dry pavers in a thin, even pass, sprayed first and then rolled.
How can I tell my pavers need sealing?
Look for chalky or faded color, joints that sit below the paver edges, sand spread across the driveway after a storm and water that soaks in instead of beading up. Green film in shaded corners is another sign. An Orlando company suggests a maintenance wash every 12 to 15 months to stretch a coat's life. For a quick opinion, call (689) 356-6421.
Which sealer holds up in Sanford's humidity?
Ask the contractor which product is planned and why. A Central Florida company calls water-based sealer the standard for the state, because moisture can escape through it, and says low quality solvent sealer can turn white and peel in humid weather. Unilock adds that water-based products have low odor and harden the joint sand. To compare options for your pavers, call (689) 356-6421.
Solvent-based sealer has a place too. Unilock says it gives a high shine and can last four to five years, but the pavers and joints must be perfectly dry when it goes on. Coverage differs as well, at roughly 100 to 150 square feet a gallon for water-based and 80 to 120 for solvent, per Unilock. Find out which product goes on which area, then request your free estimate.
Wet look or natural: which finish suits my home?
Choose a wet look for deep, rich color with some shine, or a natural finish to stay close to how the pavers looked new. Unilock says a wet-look sealer deepens color and warns that gloss can be slippery when wet, with a penetrating matte as the choice that keeps traction. Around a screened pool, footing beats shine. To see both finishes on a small spot, request your free estimate.
How often should pavers be resealed in Sanford?
Plan on two to five years, depending on whom you ask. An Orlando company says two to four years, with a sunny driveway near two and a shaded pool deck near four. Unilock says three to five. If rain soaks in and darkens the pavers instead of beading up, the coat is thin. To have yours checked, call (689) 356-6421.
Do extra coats of sealer protect pavers longer?
No. Unilock asks for the whole job to be done in one continuous session, because layers that overlap leave gloss swings, and it ties a second coat laid too soon to a whitish film. One thin, even coat does the work. If a bid sells three coats as bonus protection, ask why before you request your free estimate.
What is a good time of year to seal pavers in Sanford?
Weather counts for more than the calendar. Unilock asks for 24 to 48 hours of clear weather after sealing, with temperatures from 50 to 90 degrees and 75 ideal, and says hot pavers can stain or peel early. Wikipedia lists June to September as the wet season here, so many contractors favor the drier months. Installed recently? Mention the date when you call (689) 356-6421.
New pavers have to wait too. Unilock says efflorescence, the white film caused by salts, usually clears in two to three months and can take up to a year, and it advises 60 to 90 days before sealing. An Orlando company notes that over 50 inches of rain a year shapes the schedule. To pick a day the forecast backs up, request your free estimate.
Can sealing fix pavers that sank or shifted?
No. Sealer cannot lift a low paver or close a gap, and Unilock says it is not a cure for drainage or base problems. Pavers that rock under a car or hold a puddle need repair first, and the sand only stays once they are level. Find out if leveling sits inside the quote or gets its own price, then request your free estimate.
Which areas around a Sanford home can be sealed?
A coat can go on the driveway, the pool deck inside the cage, the back patio and the front walk. Each wears differently, which is why one plan seldom covers all four. To begin on the spot that nags at you, request your free estimate.
Driveways
Tires, oil and a full afternoon of sun land here first. Sealing the driveway counts most where cars park, turn and drip.
Pool decks inside the cage
Chlorinated splash and wet feet wear on pool pavers all year. Sealing a deck should leave it safe to walk on barefoot.
Patios under the oaks
Back patios shaded by live oaks stay damp and collect leaves, moss and green film. They tend to need the most scrubbing.
Front walks and entries
Mulch, soil and drips from potted plants end up on the front walk. Sealing the path to your door is a small job every visitor sees.
What causes paver trouble around Sanford?
Five problems come up again and again here: rain that empties the joints, damp air in the shade, lakefront debris, strong sun and old coats that clouded. Each costs less to handle early. Which of them is yours? A call to (689) 356-6421 settles it.
1. Rain that empties the joints
Sanford's airport records about 49.63 inches of rain a year over 132.6 days, Wikipedia reports. Water that sheets across a driveway pulls sand from the seams, and low joints let pavers rock and weeds root.
2. Humid air in the shade
A Central Florida sealer company puts local humidity at 80 percent or more. Pavers under oaks and along north walls stay wet longer, and green film follows.
3. Lakefront debris
Sanford sits on the south shore of Lake Monroe, and dead midges covered boats at the downtown marina in 2019, Click Orlando reported. Patios near the water can pick up grime like that, and it has to come off before any coat goes on.
4. Strong sun on open driveways
Unprotected color fades in full sun. The same company says a cheap sealer can break down in 6 to 12 months under UV, so the product matters.
5. Old coats that clouded
Unilock says a whitish film can form when moisture is trapped or a second coat goes on too soon. Low quality solvent sealer can also turn white and peel in humidity, and a failed coat has to be stripped first.
What does paver sealing cost in Sanford?
Expect about $1.50 to $3.00 per square foot in Sanford for the wash, sand and seal together. Castle Clean & Seal, a Central Florida company, lists driveways at $1.50 to $2.50 and pool decks at $1.75 to $3.00, and says smaller jobs cost more per foot. It also lists a $1,000 project minimum, which small patios and walkways usually fall under. Heavy weeds, old solvent sealer and tight access push the price up. For a number written for your home, request your free estimate.
Stripping a failed coat costs more. The same company adds $500 to $1,000 or more, and an Orlando company lists stripping and resealing at $3.50 to $5.00 per square foot over two to three days. That company also calls a quote near $0.40 per square foot a red flag. If a number looks far from these ranges, ask what it leaves out, or call (689) 356-6421 for a second opinion.
Only a wash on your mind? Look at paver cleaning and joint sand, check the full list of towns or return to Sanford paver sealing.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $450 to $900 |
| 600 sq ft | Two car driveway | $900 to $1,800 |
| 1,000 sq ft | Large driveway or pool deck | $1,500 to $3,000 |
| 1,500 sq ft | Driveway plus pool deck | $2,250 to $4,500 |
Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Why hire a contractor who works in Seminole County?
A contractor who works around Sanford already allows for wet-season delays and county sprinkler days. You get the price in writing, and the final word is yours. To begin, call (689) 356-6421.
Contractors who know Seminole County
A company that works in Sanford has already dealt with the lake humidity and the county sprinkler days. That means fewer surprises at the first visit.
A visit that costs nothing
The walk-around and the written estimate are free. If the number does not suit you, say no and owe nothing.
Prices you can hold up
Central Florida companies publish what they charge per square foot, and this site lays those ranges out in plain numbers. Treat a quote well outside those ranges as a reason to ask questions.
Your schedule comes first
Take the price home and read it twice. The contractor standards page covers what to check before you sign.
Want a free paver sealing estimate in Sanford?
Phone or use the short form, and you will have an answer inside 1 business day, usually much sooner.
Free, no obligation

How do Sanford pavers look after a fresh seal?








How does the paver sealing process work from start to finish?
Most jobs follow the same five steps, from the first walk-through to the last look. If you are ready to schedule, call (689) 356-6421.
1. Walk and measure
To price the sealing, the contractor walks the property and measures each area. Loose pavers, old sealer, screen cages and low spots that hold water get noted.
2. Treat for growth
A biodegradable algaecide goes on first, so mold, algae, mildew and weeds are treated at the root before any washing.
3. Wash gently
A low-pressure wash lifts the loosened grime. Unilock describes a fanned nozzle held about 12 inches away at a 30 degree angle, never on high.
4. Re-sand and dry
Fresh joint sand is swept in and wetted down to pack it. Unilock says drying takes a few hours in sun and about 24 in shade, so rain can move the day.
5. Seal and walk the job
On a sealing job, a sprayer lays the coat down and a dry roller evens it out, all in one session. Walk the area with the contractor and ask when feet and cars can return.
Frequently Asked Questions
How long does paver sealing last in Florida?
Two to four years, says an Orlando paver company, while Unilock, a paver maker, says many owners reapply every three to five. The Orlando company puts a sunny driveway near two years and a shaded pool deck near four. Wear from cars, chlorine and sun decides where yours lands.
What is the average cost to seal pavers in Florida?
Central Florida companies publish $1.50 to $3.00 per square foot for a clean, sand and seal. One lists driveways at $1.50 to $2.50 and pool decks at $1.75 to $3.00, with a $1,000 project minimum. A 1,000 square foot Sanford driveway would then run roughly $1,500 to $2,500.
Is it necessary to seal pavers in Florida?
No, not strictly. Unilock says its pavers do not need a coat to perform. What a coat adds is cover from water, oil and sun fade, plus joints that hold sand longer. Many Sanford homeowners choose it for those reasons and for easier cleaning.
What happens if pavers are not sealed?
They keep doing their job. They just carry less guard against moisture, stains and fading. Joint sand tends to leave sooner and green film grips more easily, so washes may come more often.
Is it better to spray or roll paver sealer?
Most contractors do both. Unilock describes a sprayer to lay the coat down and a dry roller to take up excess and avoid streaks and drips. The finish depends more on an even coat than on which tool laid it.
Can pavers be sealed in Sanford's wet season?
Yes, with some luck on the forecast. Wikipedia lists June to September as the wet season at the Sanford airport, and Unilock asks for 24 to 48 hours of clear weather after sealing. Contractors watch the radar and move the work to the next dry window.
Do I need to turn off my Sanford sprinklers before sealing?
Yes, for the cure time. Unilock says nearby automatic sprinklers should be off because water can leave white marks and get trapped under the coat. Reclaimed water zones run twice a week all year under county rules, so your contractor should know which days they fire.
Can brick pavers in Sanford be sealed too?
Yes. An Orlando company prices standard brick paver sealing at the same $1.50 to $3.00 per square foot and natural stone at $2.00 to $3.50. Ask which sealer the contractor picks for brick, since it is more porous than concrete.
How long should I stay off sealed pavers?
Plan on several hours for feet and two days for cars. A Central Florida company asks for 4 to 6 hours before foot traffic, about 24 hours before furniture and at least 48 hours before vehicles. The product label has the exact times.
Ask what your Sanford pavers need next
Tell a contractor your street and the problem spot, and expect a reply within 1 business day, usually much sooner.
Free, no obligation
