Click To Call(689) 356-6421Click To Get A Free Estimate
Pale natural stone pool deck inside a screened lanai in Sanford with a chair and a potted palm

Protect pale stone around the pool

Travertine Sealing in Sanford, FL

Call (689) 356-6421 for a free travertine sealing estimate on your Sanford pool deck or lanai.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 356-6421

Can I get travertine sealed at my Sanford home soon?

Yes, a local contractor seals travertine across Sanford, FL, and a reply reaches you inside 1 business day, usually much sooner. The estimate costs nothing and saying no afterward is fine. To start, call (689) 356-6421.

Travertine around a Sanford pool or lanai soaks up chlorinated splash, oak leaf stains and rain, and a sealer slows all three. Spills then sit on the surface long enough to wipe up, and the stone keeps its tone. Natural stone is its own job, because it does not behave like a concrete paver. Tell the contractor which areas you walk on barefoot, then request your free estimate.

Call (689) 356-6421

Is sealing travertine different from sealing other pavers?

Travertine has open pores

Travertine is natural stone, and an Orlando stone company lists it with marble, onyx and limestone as stone that etches easily. Etching is the dull mark left behind when something acidic touches the surface. That company says a sealer that soaks in helps cut down on it. To go over the options for your deck, call (689) 356-6421.

Cleaning has to stay gentle

A Southwest Florida sealing company uses natural stone cleaners with a neutral pH and no acids or strong alkaline products at any stage. The Orlando stone company aims for a pH near 7.0 as well. That choice matters because etching is easy on this stone. To get the cleaner named in writing, request your free estimate.

Pitting gets fixed first

The Southwest Florida company says pitting or other surface damage is dealt with before any sealer goes on. A coat cannot fill a rough patch, and it can lock dirt into one. Point out any rough spots when you call (689) 356-6421.

Family standing on a stone pool deck inside a screened lanai, the kind of surface a travertine sealer protects
Why choose us

Which sealer should go on travertine, and why do companies disagree?

Florida companies do not agree on one product, and that is worth knowing before you compare bids. Read the three views below, then ask each contractor which one applies and why. To start that conversation, call (689) 356-6421.

Sealers that soak into the stone

A Southwest Florida company uses an impregnating sealer that sinks into the pores, forms no film and so cannot peel or yellow. An Orlando stone company uses a penetrating solvent-based sealer and says it helps reduce etching. Another Central Florida company says limestone needs a penetrating product too. To ask about a penetrating coat for your deck, request your free estimate.

A water-based sealer that locks sand

A different Florida company uses a water-based sealer that also stabilizes joint sand, in a natural matte or semi-gloss finish. It says the sealer can go on damp surfaces, so work need not wait for the dry season. If your stone has open joints, ask (689) 356-6421 how they would be filled.

A contrary warning

A third Florida company warns against nano-based and impregnating sealers on travertine. It rolls on a heavy flood coat that saturates the stone and joints, and it treats the stone with a prep product first so the coat can bond. It says skipping that prep can leave sealer that peels or flakes. When two professionals disagree, a small test patch settles it, so request your free estimate.

What do chlorine, rain and oak shade do to travertine in Sanford?

Sanford stone fights three things at once: pool water, a wet climate and falling leaves. Each one leaves a different mark, so each gets its own look. To have a contractor judge your stone, call (689) 356-6421.

Chlorine and salt

A Florida sealing company says a sealer helps guard stone against chlorine, salt and water damage. A Southwest Florida company rates its sealer for wet areas and salt systems. Ask which kind of pool you have when you request your free estimate.

Rain and humidity

Wikipedia puts the Sanford airport at about 49.6 inches of rain a year on about 132.6 days. Stone around a pool stays damp through much of that, and the Florida sealing company says sealing reduces mold and mildew in wet areas. For a deck that rarely dries, call (689) 356-6421.

Oak leaves and shade

Downtown Sanford streets are shaded by live oaks with Spanish moss, Wikipedia notes, and a Central Florida paver company lists leaf tannins among the stains it treats before cleaning. A lanai under oak cover can pick up brown streaks on stone. Mention the trees when you request your free estimate.

How do I know my Sanford travertine needs a new sealer?

A Southwest Florida company lists five warning signs, and any one of them is a reason to book a look. None of them needs tools to spot. Check them with the contractor beside you, and call (689) 356-6421 when one shows up.

Water soaks in

When water darkens the stone and sinks in instead of beading, the sealer has worn thin.

Dark spots in the pores

A Southwest Florida company lists dark staining inside the stone pores as a warning sign that the old coat has failed.

White mineral deposits

Chalky white patches on the surface are another sign on the same company's list, and they should be looked at before any coat goes on.

A rough or pitted feel

Pitting is surface damage. The same company says it gets addressed first, because sealer cannot smooth it.

Two years since the last coat

That company counts two or more years since the last sealing as a warning sign, so an old coat with no date on it deserves a look.

How often should travertine be resealed in Sanford?

Published answers differ, so expect a range. A Southwest Florida company says outdoor travertine needs sealing every 2 to 3 years, a Florida sealing company says every 1 to 2 years, and an Orlando company puts general paver sealer at 2 to 4 years. A sunny deck with daily pool use belongs at the short end. To have yours judged, call (689) 356-6421.

Calendar dates matter less than what the stone does. When water stops beading, the coat has thinned, whatever the label said. A yearly look at the deck costs nothing at an estimate visit, so request your free estimate.

How it works

What is the travertine sealing process, step by step?

A good travertine job follows a fixed order, and skipping a step shows up later as peeling or haze. The six stages below come from published Florida company descriptions. To see them applied to your own stone, call (689) 356-6421.

1. Walk the stone

The contractor measures the deck or lanai, finds pitted spots and joints that need work, and checks how the stone was sealed before.

2. Clean with stone-safe products

A neutral pH cleaner made for natural stone goes on, with no acids or strong alkaline products at any point in the job.

3. Treat what is growing

A second neutral treatment deals with leftover mold or mildew, so the sealer meets clean stone.

4. Tape off and dry

On pool decks, drains and tile markers are covered first. The stone then dries in the air so trapped moisture can leave.

5. Apply the sealer

The product goes on by roller or sprayer in the amount its label calls for. Ask whether an anti-slick additive is part of the plan.

6. Cure and walk it

The surface stays closed until the manufacturer's cure time passes. Walk it with the contractor and ask when the pool can open.

Will sealed travertine be slippery around my Sanford pool?

Footing is a fair worry, because pool decks get wet by design. The answer depends on the finish and on any additive, so ask before the job starts. To put the question to a contractor, call (689) 356-6421.

Pick a finish for grip

An Orlando stone company advises against sealers that promise shine or gloss, and a Southwest Florida company says its sealer stays non-slip when wet. A natural look usually gives more grip than a glossy one. To compare finishes on a small patch, request your free estimate.

Ask about an anti-slick additive

Another Florida company broadcasts an anti-slick additive over stone surfaces, and a Central Florida company says non-slip additives for travertine pool areas can add a small amount to the price. Ask whether one is in your quote, and call (689) 356-6421 to talk it through.

Pricing

What does travertine sealing cost in Sanford?

Expect roughly $2.00 to $3.50 per square foot for natural stone, going by an Orlando paver company, with typical projects from $1,000 to $3,500. For pool decks of pavers or travertine, another Central Florida company posts $1.75 to $3.00 and a $1,000 project minimum. For a number written for your stone, request your free estimate.

Several things push a quote up: pitting repairs, thick mold, a failed old coat that must be stripped and a non-slip additive. The Central Florida company says stripping failed sealer usually adds $500 to $1,000 or more. Ask what the number includes, or call (689) 356-6421 for a second look.

Stone areaNatural stone at $2.00 to $3.50Pool deck rate at $1.75 to $3.00
300 sq ft$600 to $1,050$525 to $900
500 sq ft$1,000 to $1,750$875 to $1,500
800 sq ft$1,600 to $2,800$1,400 to $2,400
1,000 sq ft$2,000 to $3,500$1,750 to $3,000

The first column uses the $2.00 to $3.50 per square foot an Orlando paver company lists for natural stone. The second uses the $1.75 to $3.00 posted for pool decks of pavers or travertine by another Central Florida company. Both were read in November 2026. That second company also sets a $1,000 project minimum, so a small lanai can price above the table. Your own quote comes after a contractor sees the stone.

Get a Free Estimate

Two contractors working a roller and a hand sprayer across a pale stone patio near a screened pool

Which parts of a Sanford home have travertine worth sealing?

Stone shows up in more places than the pool deck, and each place wears differently. Walk the property and list every spot before the estimate. Pick the spot that bothers you most and call (689) 356-6421; that one gets priced first.

Pool deck inside the cage

Splash, sunscreen and bare feet reach this stone every day, so it is the first place to look.

Lanai and covered patio

Roofed stone stays out of the sun but not out of the humidity, so damp corners can still grow mildew.

Entry steps and front walk

Visitors see these first, and steps get wet from rain and from the potted plants beside them.

Pool coping and borders

Edge pieces take the most water. A sealer that skips them leaves a ring of bare stone around a sealed deck.

What should I ask a contractor before my travertine is sealed?

Four questions sort careful bids from careless ones. Write the answers down and compare them side by side. For a bid that answers all four, request your free estimate.

Which product, and why that one?

The contractor should name the sealer and say whether it penetrates or sits on the surface. Given the disagreement among Florida companies, a reason is worth hearing. Ask by phone at (689) 356-6421.

How does the prep work?

A prep step helps sealer bond to stone, and one Florida company says leaving it out can make sealer peel or flake. Ask what happens between the wash and the coat, then request your free estimate.

What treats the stains?

The same company picks stain products that will not react with its sealer. Ask whether yours does the same, and call (689) 356-6421 if the answer is vague.

When can the pool open again?

Cure time follows the manufacturer's label, and a Central Florida paver company asks for 24 hours before foot traffic and 48 to 72 hours before vehicles on paver jobs. Ask for your own times in writing when you request your free estimate.

Which towns near Sanford can get travertine sealing?

The same contractors who work in Sanford also serve the towns below, from Longwood and Oviedo to DeLand and Daytona Beach. Each town has its own page with local facts. If yours is not listed, call (689) 356-6421.

Photos

What does sealed stone and paver work look like near Sanford pools?

Wide sealed gray and brown paver driveway with a circular border at a brick and stucco home beside a Sanford screen enclosure
Sealed brick-red paver pool deck beside a kidney-shaped pool in a screened enclosure beside a Sanford screen enclosure
Sealed charcoal paver patio with a stone fire pit and Adirondack chairs under a large oak beside a Sanford screen enclosure
Sealed brick-red paver front walkway with a soldier-course border up to a porch beside a Sanford screen enclosure
Close view of older brick pavers after sealing beside a Sanford screen enclosure
Shaded paver patio with one cleaned half beside a mossy half beside a Sanford screen enclosure
Contractor pressure cleaning a screened pool deck beside a Sanford screen enclosure
Contractor spraying sealer on a paver walkway beside a Sanford screen enclosure
Questions

What do Sanford homeowners ask about sealing travertine?

How much does it cost to seal Travertine pavers?

An Orlando paver company lists natural stone at $2.00 to $3.50 per square foot, with typical projects from $1,000 to $3,500. Pool decks of pavers or travertine are priced at $1.75 to $3.00 by another company in the region, which also keeps a $1,000 project minimum. A 500 square foot Sanford deck would then land near $875 to $1,750 before the minimum.

Which sealer should be used on travertine?

Companies split. A Southwest Florida company and an Orlando stone company use penetrating sealers that sink into the pores. A third Florida company warns against nano and impregnating products and rolls a flood coat instead. Ask the contractor to name the product and explain the choice.

Which sealer works for travertine tiles?

Tile and pavers are the same natural stone, so the same split applies. Tile adds grout lines, and an Orlando stone company says grout haze left from installation may need special removal or honing. Ask how haze and joints get handled before any sealer is chosen.

How much should I pay for paver sealing?

For concrete or brick pavers in Central Florida, published prices run $1.50 to $3.00 per square foot for a clean, sand and seal. Natural stone costs more, at $2.00 to $3.50 per an Orlando company. A quote far below those figures is worth a question about what it leaves out.

Do I need to seal travertine around a Sanford pool?

It is a choice, but a Florida sealing company says sealing helps guard stone against chlorine, salt and mold in wet areas. Sanford gets about 49.6 inches of rain on about 132.6 days a year, so a pool deck stays damp for long stretches. Sealing slows what that moisture leaves behind.

How often should travertine be resealed in Sanford?

Published answers run from every 1 to 2 years to every 2 to 3 years for outdoor stone. A sunny deck with heavy pool use sits at the short end. If water stops beading, the coat is thin no matter what the calendar says.

What cleaners are safe on travertine?

A Southwest Florida company uses only natural stone cleaners with a neutral pH and avoids acids and strong alkaline products entirely. An Orlando stone company also aims for a pH near 7.0. Ask the contractor to name the cleaner before the job starts.

Is sealed travertine slippery when wet?

It can be if the finish is glossy. A Southwest Florida company says its sealer stays non-slip when wet, another Florida company adds an anti-slick additive, and an Orlando stone company advises against sealers that add gloss. Ask what the finish does underfoot at a pool.

Will sealing change the color of my travertine?

Often it deepens the color a little. A Florida company says sealing can deepen color and texture and add a subtle sheen, with natural matte and semi-gloss as the two finishes it offers. A penetrating sealer is described as keeping the stone's natural look. Test a small spot first.

Can Sanford sprinklers stay on during a sealing job?

No. A Central Florida paver company turns irrigation off during the service and for 24 hours afterward, and it asks homeowners to pause pool service on sealing day and the day after. Tell the contractor which sprinkler zones touch the stone.

Ready to protect your Sanford travertine?

Use the short form or ring the number, and a local contractor answers inside 1 business day, usually much sooner.

Call (689) 356-6421

Free, no obligation